Videofied BR250 Waterproof Two-way Wireless Keypad with RFID

The Outdoor Proximity Reader is totally wireless and self-powered so that it can be mounted anywhere without expensive power cables. To arm or disarm, the user simply places the prox card next to the reader to arm/disarm the system.

Description
The Outdoor Proximity Reader Model BR is a battery operated, wireless Proximity Reader designed for arming and disarming operation of Videofied security systems. The Proximity Reader consists of two LEDs for status information, a built in sounder, S2View Spread Spectrum, interactive, encrypted wireless circuitry for secure two-way communication with the control panel, and is multi badge programmable. The LED display provides status information of arming, disarming, partial arming, tamper fault, and maintenance. The Proximity Reader is typically installed near entry/exit doors to allow system users enough time to arm and exit the premises, and to enter and disarm the system before time delays expire. When the system is armed, the built in sounder emits short beeps and one red and one green LED flash to identify arming. Upon entring the armed premises and swiping a programmed badge, the built in sounder emits short beeps and two green LED flashes to identify disarming. A dual tamper function provides detection for both Badge Reader cover and wall tamper. The Proximity Reader is powered by three lithium batteries that can last up to four years or more, depending on the amount of Proximity Reader activity. The Proximity Reader transmits a checkin signal every 8 minutes that includes its unique identification code, along with the tamper condition, serial number, date of manufacture, software revision and battery status.

Features
- S2View - Spread Spectrum, Videofied, Interactive AES Encrypted Wireless technology provides optimum signal integrity and security.
- Mobility - Use outdoors or indoors with a fully weather proof housing with standing temperatures from -30 to +60 C.
- Displays two LED flashes along with a series of beeps to identify the armed or disarmed status.
- Built in sounder lets you know when the Badge Reader detects your card or badge.
- Lithium batteries - four years.
- Dual Tamper - provides detection for both wall and cover tamper condidtions.
- Supervised - Transmits a check-in/ status signal every 8 minutes indicating tamper state, serial number, date of manufacture, software revision and battery status.
- Uses MIFARE class, 13.56MHz, 1K or 4K, Keyfobs or badges.

Applications
- Arming and disarming Videofied security systems.

Technical Specifications

Electrical Data
Panel Compatibility XL, XLL, Visio, XT, XT-iP, XV, XV-iP, XTO
Power requirements three 3.6 V batteries
Nominal Voltage 3.6V
Low Battery Limit 2.7V
Battery type SAFT Lithium, 3x LS14500 (NOT INCLUDED)
Battery life Up to 4 years
RF technology S2View
Radio type Spread Spectrum Bidirectional
Operating frequency 868MHz
Transmission security AES encryption algorithm
Supervision Polled signal every 8 minutes
Antenna Integrated
Tamper detection Wall and Cover tamper
Display lighting Automatic/2 LED
Built in sounder Emits arm and disarm beeps
Operating temperature -30 - +60 C
Maximum relative humidity 95%, non-condensing

Physical Data
Material Polycarbonate UL94
Dimensions (LxWxD) 140 mm x 90 mm x 38 mm
Weight 136 g (without batteries)

Installation/Mounting
Unit/Base 2 screws secure the Badge Reader to the base. 3 screws secure base to flat mounting surface.

Certification & Approvals
CE
EN50131-Grade2
EN300220