Videofied IDC200 Two-way Door/Window Contact (White)

The Door/Window Contact a battery operated, wireless door contact designed for use in Videofied security systems. Door contacts are intended for use in detecting the opening and closing of doors, windows, or cabinet doors/drawers.

Description
The Door Contact Models IDC200 is a battery operated, wireless door contact designed for use in Videofied security systems. Door contacts are intended for use in detecting the opening and closing of doors, windows, or cabinet doors/drawers. The IDC200 consist of a switch detector with S2View spread spectrum, Videofied, interactive, encrypted wireless circuitry for secure two-way communications with the control panel. A dual tamper function provides detection for both wall and cover tamper. The transmitter is typically installed on the stationary surface of an opening (door frame or window frame), while the magnet is installed on the door or window. With the door or window closed, the magnetic field forces a reed switch inside the detector to close, creating a secured condition. When the alarm system is armed and the door or window is opened, the detector transmits an open signal. The control panel receives this signal and responds according to system configuration/programming. The detector is powered by one lithium battery that can last up to four years, depending on the amount of detector activity. The detector transmits a check-in signal every eight minutes that includes its unique identification code along with the current alarm state, tamper conditions, serial number, date of manufacture, software version and battery status.

Features
- S2View - Spread Spectrum, Videofied, Interactive, AES Encrypted Wireless technology provides optimum signal integrity and security.
- Supervised - transmits a check-in/status signal every 8 minutesindicating open/closed state, tamper conditions, serial number, date of manufacture, software revision and battery status.
- Dual tamper - provides detection for both wall and cover tamper.
- Duracell CR123A Lithium battery - Up to four years.

Applications
Residential
- Doors
- Windows
- Cabinet doors/drawers
- Other similar openings
Commercial
- Doors
- Windows
- Overhead garage doors
- Cabinet doors/drawers
- Other similar openings

Technical Specifications

Properties
Panel Compatibility XL, XLL, Visio, XT, XT-iP, XV, XV-iP, XTO, XTO-iP
Power Requirements
Nominal Voltage 3.0V
Low battery limit 2.7V
QTY and Battery Type One 3.0V Lithium Duracell, CR123A (NOT INCLUDED)
Battery life Up to 4 years

Current Consumption
Max 35mA
Axis of detection Three axis (X, Y, Z)
Opening Detection Distance 2.3cm
Closing Detection Distance 2.0cm

RF Technology S2View
Radio type Spread Spectrum Bidirectional RF
Central Frequency 868MHz
Transmission Security AES algorithm encryption
Supervision Polled signal every 8 minutes
Antenna Integrated
Tamper Wall and cover tamper

Physical data
Operating temperature -10 - +40 C
Maximum relative humidity 75%, non-condensing
Material Plastic: ABS-ULV0
Magnet Alnico 5
Dimensions LxWxD
Body 95 x 25.8 x 22mm
Spacer 64 x 15 x 10mm
Magnet 64 x 15 x 11mm
Weight: Detector 38g - without battery
Physical Protection IP31 and IK04

Certifications & Standards
Standards EN60950-1:2006+/A11:2009+/A1:2010
EN300220-1 V2.4.1
EN300220-2 V2.4.1
NF EN50130-4:1995+/A1:1998+/A2:2003;
NF EN50130-5:1998 Classe II
NF EN50131-2-6:2008 - Grade 2
NF EN50131-5-3:2005 - Grade 2
NF EN50131-6:2008 Grade 2 -Type C
Certifications Europe CE / EN50131 Grado 2
Netherlands NCP

Installation/Mounting
Detector
One screw secures cover to base; Two screws secure detector to mounting surface.
Magnet
Two screws secure magnet assembly to mounting surface. Spacing
Maximum 10mm gap between detector and magnet.