Videofied IUT200 Two-way Universal Indoor Radio Transmitter

Videofied IUT200 Two-way Universal Indoor Radio Transmitter

IUT200


shop price: € 70.00
web price: € 56.00

AddThis Social Bookmark Button
Videofied IUT200 Two-way Universal Indoor Radio Transmitter

- Interactive Wireless Technology
- Fitted with a wired input for wired device connection
- Dual tamper
- Lithium battery - 4 years battery life

Description
The IUT universal transmitter is a wireless battery-powered device designed for use in Videofied security systems. The IUT is used as an non powered open circuit detector linked to your standard hardwire intrusion or smoke/heat detectors. The device allows to integrate into your Videofied system devices like opening detectors, glass break detectors, thermal detectors, etc. The IUT is powered by a one lithium battery that can last up to four years, depending on the amount of detector activity. The IUT transmits a check-in signal every eight minutes that includes its unique identification code along with the current alarm state, tamper conditions, serial number, date of manufacture, software version and battery status. The IUT uses S2View spread spectrum, Videofied, interactive, encrypted wireless circuitry for secure two-way communications with the control panel. A dual tamper function provides detection
for both wall and cover tamper. The transmitter is typically installed on the stationary surface.

Features
- The Videofied S2View Spread Spectrum Interactive AES Encrypted Wireless technology provides optimum signal integrity and security.
- Supervised - transmits a check-in/status signal every 8 minutes indicating detector state, tamper conditions, serial number, date of manufacture, software revision and battery status
- Dual tamper - provides detection for both wall and cover tamper.
- External input - accepts normally closed (NC) dry (no power) circuits from standard hardwire intrusion devices, including fast response devices.
- Lithium battery - up to four years

Technical Specifications

Electrical Data
Panel Compatibility XL, XLL, XT, XV, VISIO1000, VISIO GPRS
RF Technology S2View
Radio type Spread Spectrum Bidirectional RF
Operating Frequency 868MHz
Radio Antenna Integrated
Power requirements 1x LS14500 3.6V SAFT lithium battery
Nominal Voltage = 3.6 V
Low battery limit = 2.7V
Current consumption Standby (1h average) = 30 uA, Max=70mA (with alarm and transmission)
Battery life Up to 4 years
Installation support Do not mount on ferromagnetic support (example : wood)
Detection Wired input (max length =16m) connected to an external detector dry contact (Normally closed in standby).
Tamper detection Wall and cover tampered
Supervision Radio, pile, tamper

Physical Data

Material ABS UL94V0
Dimensions (LxWxD) 80 mm x 35 mm x 23 mm
Weight 40 g (sans pile)
Protection rating IP31 / IK04
Operating temperature -10 - +40 C
Maximum relative humidity 75%, non-condensing
Mounting
Device and base One screw to close the device and two screws to mount it.
Installation support
Non-ferromagnetic support (example : wood)

https://www.videofied.com/_asset/p4g7ag/en - contact - iut - data

Cart  

(empty)



SoundTech Ltd SoundTech Ltd SoundTech Ltd SoundTech Ltd
.