The IMD is a wireless, indoor motion detector designed for use in Videofied security systems. The detector is powered by one lithium battery that can last up to 4 years depending on the amount of detector activity.
Description
The Motion Detector model IMDA200 is a wireless, indoor motion detector designed for use in Videofied security systems. The detector is powered by one lithium battery that can last up to 4 years depending on the amount of detector activity. The detector transmits a check-in signal every eight minutes that includes its unique identification code along with the current detection sensor state, tamper condition, serial number, date of manufacture, software revision, and battery status.
Features
– SAFT LS14500 AA Lithium battery for long life.
– Standard coverage lens (12m distance)
– Dual tamper function provides detection for both wall and cover tamper.
– Transmits check-in/status signal every 8 minutes.
Technical Specifications
Properties
Panel Compatibility XL, XLL, Visio, XT, XT-iP, XV, XV-iP, XTO, XTO-iP
Power requirements
Type AA
Nominal Voltage 3.6v
Low battery limit 2.7v
Battery type One SAFT AA Lithium, LS14500 (NOT INCLUDED)
Battery life (estimated) Up to 4 years
Current Consumption
Max 37 mA
RF Technology S2View Bidirectional Radio
Central Frequency 868MHz
Radio type Spread Spectrum Bidirectional RF
Transmission security AES algorithm encryption
Supervision Panel polls devices every 8 minutes
Antenna Integrated
Tamper Wall and cover tamper
PIR Performance
Technology Passive infrared DSP
Type Dual element
Lens Fresnel
Detection Angle 90degree
Detection Distance Up to 12m
Motion Detection pattern 24 facets
Pet-tolerant for animals up to 18kg
Environmental and Physical Properties
Operating temperature -10 – +40 C
Maximum relative humidity 75%, non-condensing
Material ABS – ULV0
Dimensions (LxWxD): 51.2 x 80.9 x 36.8mm
Weight 58 g (without battery)
Installation/Mounting
Mounting Height 2 to 2.3m
Mounting on Wall
On Flat Wall With 2 x Screws
In Corner With 2 x Screws
Closing of the Casing Closing by clip and screw if required by local legislation
Certifications & Standards
Standards EN60950-1:2006+/A11:2009+/A1:2010
EN300220-1 V2.4.1
EN300220-2 V2.4.1
NF EN50130-4:1995+/A1:1998+/A2:2003;
NF EN50130-5:1998 Classe II
NF EN50131-2-2:2009 – Grade 2
NF EN50131-5-3:2005 – Grade 2
NF EN50131-6:2008 Grade 2 –Type C
Certifications Europe CE / EN50131 Grade2
Netherlands NCP