Wireless technology for maximum security
– Curtain detection lens (1m curtain width)
– Dual tamper function
– PIR motion detector
– LS14500 SAFT AA Lithium battery for extended battery life
– Transmits check-in/status signal every 8 minutes
Description
The IMDC is a wireless, curtain detection, indoor motion detector designed for use in Videofied security systems.
The IMDC is an dual-element passive infrared system with a curtain Fresnel lens.
The detector is powered by one lithium battery that can last up to 4 years depending on the amount of detector activity.
Please install the detector 10 to 20 cm from the wall to be protected. The detection field should be parallel to that wall. Please ensure that an open door or window will not mask the IMDC detection field.
The detector transmits a check-in signal every eight minutes that includes its unique identification code along with the current detection sensor state, tamper condition, serial number, date of manufacture, software revision, and battery status.
Features
– S2View spread spectrum radio protocol.
– AES encrypted secured wireless system.
– Bidirectional radio transmission between the devices and the panel.
– Curtain Fresnel lens. Motion dection field : 1m width.
– Wall and cover tamper
– Lithium battery: up to 4 years of battery life.
Properties
Panel Compatibility W, XL, XT, XV, Visio and their variants
Power requirements
Type AA
Nominal Voltage 3.6V
Low battery limit 2.7V
Battery type One SAFT AA Lithium, LS14500 (NOT INCLUDED)
Battery life (estimated) Up to 4 years
Current Consumption
Standby (1h average) 40 uA
Max 37 mA
RF Technology S2View Bidirectional Radio
Central Frequency 868MHz: IMDC200 (Europe, Africa, Asia)
Radio type Spread Spectrum Bidirectional RF
Transmission security AES algorithm encryption
Supervision Panel polls devices every 8 minutes
Antenna Integrated
Tamper Wall and cover tamper
PIR Performance
Technology Passive infrared DSP
Type Dual element
Lens Fresnel
Detection angle 5 degrees max curtain detection
Detection Distance Up to 12m
Installation / Mounting
Mounting Height 2 meters
Mounting on flat wall With 2 x Screws
Closing of the Casing Closing by clip and screw if required by local legislation
Environmental and Physical Properties
Operating temperature -10 C to +40 C
Maximum relative humidity 75%, non-condensing
Protection markings IP30/IK04
Material ABS-ULV0
Dimensions (LxWxD): 51.2 x 80.9 x 36.8mm
Weight 58 g (without battery)
Certifications & Standards
868MHz – IMDC200
NF&A2P – Grade 2