Ελληνικά 
The Indoor MotionViewer, a battery-powered PIR motion sensor with an integrated digital video camera and infrared illuminators, is designed to detect an intrusion, instantaneously record a 10 second (adjustable) video and send the video alarm signal to the control panel via RF for cellular relay to the central station where immediate review/verification can initiate a priority response and dispatch.
Description
The MotionViewer Model IMV210 is a wireless, battery operated, indoor motion-activated video camera designed for use in Videofied security systems. Motion-activated cameras are intended for applications where video verification of intrusion alarms is necessary or desired. The IMV210 consists of a digital camera, a passive infrared motion detector, and S2 VIEW spread spectrum, videofied interactive, encrypted wireless circuitry for secure two-way communications with the control panel. The camera consists of a CMOS color sensor and an 110 degree, wide angle lens. Two infrared LEDs provide a night illumination distance of approximately 7 meters. For motion or movement detection, a fresnel lens inside the cover captures a up to 40-foot wide, 90 degree angle passive infrared pattern. The base allows for flat wall or corner mounting. A dual tamper function provides for both wall and cover tamper detection. The camera is typically installed to cover rooms, hallways, stairwells, and other similar areas where detection coverage is needed. When the alarm system is armed and the motion detector senses heat motion, the detector transmits a signal and activates the camera, which captures up to a 10-second digital video segment. The control panel receives the signal and responds according to system configuration/programming. The alarm and video segment are reported via the control panel to the central monitoring station. The detector is powered by three lithium batteries that can last up to four years or more, depending on the amount of detector activity.
Features
– S2View – Spread Spectrum, Videofied, Interactive, AES Encrypted Wireless technology provides optimum signal integrity and security.
– Camera – CMOS sensor with 110 degree wide angle lens and adjustable video resolution of 320 x 240 pixels.
– Night illumination – up to 7 m distance using two infrared LEDs.
– Motion detector – dual-element, passive infrared with fresnel lens for up to 12 m wide, 90 degree coverage pattern.
– Camera records color during the day and black and white at night.
– Supervised – transmits a check-in/status signal to the panel every 8 minutes indicating unique identification code along with the current detection sensor state, tamper condition, serial number, manufacture date, software revision, and battery status.
– Dual tamper – provides cover and wall tamper detection.
– Lithium batteries – last up to 4 years depending on activity and environment (estimated).
Technical Specifications
Properties
Panel Compatibility XL, XLL, Visio, XT, XT-iP, XV, XV-iP, XTO, XTO-iP
Power
Nominal Voltage 3.6V
Low Battery Limit 3V
Battery type 2 SAFT AA Lithium, LS14500 (NOT INCLUDED)
Battery life (estimated) Up to 4 years
RF Technology S2View Bidirectional Radio
Central Frequency 868MHz
Transmission Security AES Algorithm encryption
Supervision 8min
Antenna Integrated
Camera
Angle 110degrees
Sensor Type CMOS
Daylight Vision Programmable: Color or B&W
Night Vision Automatic Infra-red B&W
IR Illumination Automatic with 2 x IR LEDs
IR Illumination Distance Up to 7m
Video
Video Formats MJPEG-WMV, MJPEG-DIFF
Frequency 5i/s
Video Length Programmable (Default 10s)
Resolution QVGA (320×240)
Quality SQ or HQ
Default File Size +/- 220Kb
Snapshot
Format Jpeg
Resolution QVGA(320×240) or VGA(640×480)
Quality HQ or SQ
Typical File Size 8Kb
PIR Performance
Detection Angle 90 degrees
Distance 12m
Sensitivity Programmable to 5 Predefined Levels
Tamper Cover and Wall Tamper
Environmental and Physical Properties
Temperature -10 – +50 C
Relative Humidity 90%, non-condensing
IP Level IP30/IK04
Material ABS type ULV0 – White
Dimensions (LxWxD) 98x52x40mm
Weight 60g (without batteries)
Installation/Mounting
Mounting Height 2 to 2.3m
Mounting on Wall
On Flat Wall With 2 x Screws
In Corner With 4 x Screws
Closing of the Casing Closing by clip or with screw if required by local legislation
Certifications & Standards
Standards EN60950-1:2006+/A11:2009+/A1:2010
EN300220-1 V2.4.1
EN300220-2 V2.4.1
NF EN50130-4:1995+/A1:1998+/A2:2003;
NF EN50130-5:1998 Classe II
NF EN50131-2-2:2009 – Grade 2
NF EN50131-5-3:2005 – Grade 2
NF EN50131-6:2008 Grade 2 -Type C
Certifications Europe CE / EN50131 Grade 2
Netherlands NCP
