The Videofied Smoke Sensor enhances protection and uses advanced optical detection technology.
Description:
ISD smoke detector is a wireless, battery-powered device designed to be used with a Videofied security system.
The detector is embedded with a smoke detection module, a buzzer and a radio module.
Install the detector in the middle of the zone to protect.
Installing the detector too close from a combustion source (kitchen with few windows or poorly ventilated, garage, furnace, hot water heaters, space heaters, etc.) or close to a humidity source (bathroom) can trigger false alarms. If the site has several floors, install at least a smoke detector on every floor.
The detector is powered by a 3V Duracell CR123A Lithium battery for a two year battery life (on average).
When the ISD smoke detector triggers, it generates a sound alarm and the information Smoke Detection is sent to the monitoring station through the alarm panel.
Indicator light:
– Yellow blink with 3 beeps: Malfunction
– Continuous yellow blink: Low Battery
– Red blink once every 334 seconds: Normal Operation
– Red blink once every 10.7 seconds: Reduced sensitivity operation (during 10 minutes)
– Fixed red light with 3 loud beeps: Alarm
Features:
– Push button recording.
– Optical detection of visible particles.
– S2View – Spread Spectrum, Videofied, Interactive, AES Encrypted Wireless technology provides optimum signal integrity and security.
– Buzzer: 85 dB output level at 3 meters for up to 3 minutes in Alarm mode.
– Supervised – transmits a check-in/status signal to the panel every 8 minutes indicating unique identification code along with the current detection sensor state, tamper condition, serial number, manufacture date, software revision, and battery status.
– Dual tamper – provides cover and wall tamper detection.
– Lithium batteries – last up to four years depending on activity and environment (estimated).
Applications
Programming and use with Videofied security systems.
Features
Panel Compatibility W, XL, XT, XV and their variants
RF Technology S2View
Radio type Spread spectrum bidirectionnal
Operating frequency 868MHz – ISD200 (Europe, South Africa, Asia)
Transmission security AES encryption algorithm
Supervision Polled signal every 8 minutes
Antenna Integrated
Tamper detection Wall and cover tampered
Power requirements 3V DC, 1 Duracell CR123A Lithium battery (NOT INCLUDED)
Battery life 2 years (common usage)
Output level 85dB at 3 meters
Physical data
Operating temperature -0 /+49 C
Maximum relative humidity 85%, non-condensing
Dimensions (LxlxE) 120 mm x 5.3 mm
Weight 140g (without battery), 156g (with battery)
Protection Marking IK07/IP30
Installation / Mounting
Detector and base 2 screws secure base to the mounting surface
Standards & Certifications:
CE
868MHz (ISD200)
Sensitivity compliant to: UL 217, UL268 and EN14604
Compliant to annex IV from R&TTE 1999/5/CE directive
FCC
915MHz (ISD601)
UL 217
USA FCC (Part 15C)
Canada IC (RSS-210 Issue 8)
920MHz (ISD702)
Australie C-Tick (AS/NZS4268)